TopView.JPG
SizeView.JPG
Front View.JPG
BackView.JPG
AdapterView.JPG
TopView.JPG
SizeView.JPG
Front View.JPG
BackView.JPG
AdapterView.JPG

887 18V Brushed Motor Solder Connections

from $45.00

This is an 887 size brushed motor. This motor has been tested with the Peanut Workshop motor controllers using various battery voltages, they have been the most reliable motor when used within their rating of 18V.

These motors have demonstrated exceptional power and longevity up to 8S LiFePo4 (24 - 28VDC), exceeding this voltage range (even with limiting the PWM output %) will result in excessive heat with limited power increase causing premature failure. We recommend keeping the battery voltage below 30VDC to protect the brushes.

Our testing at 40V with the power limited to 70% has been positive, this motor has been proving to be just as reliable as the leaded motors. This has a different brush design that will likely hold up even better.

***Note, if using these instead of a 775 motor, an adapter is required, 775 motors mounting hardware uses M4 screws with a 29mm center to center spacing, 887 motors use M5 screws with a 32mm center to center spacing.

Mounting:

This is an 887 size brushed motor. This motor has been tested with the Peanut Workshop motor controllers using various battery voltages, they have been the most reliable motor when used within their rating of 18V.

These motors have demonstrated exceptional power and longevity up to 8S LiFePo4 (24 - 28VDC), exceeding this voltage range (even with limiting the PWM output %) will result in excessive heat with limited power increase causing premature failure. We recommend keeping the battery voltage below 30VDC to protect the brushes.

Our testing at 40V with the power limited to 70% has been positive, this motor has been proving to be just as reliable as the leaded motors. This has a different brush design that will likely hold up even better.

***Note, if using these instead of a 775 motor, an adapter is required, 775 motors mounting hardware uses M4 screws with a 29mm center to center spacing, 887 motors use M5 screws with a 32mm center to center spacing.

Throttle or Brake Pedal (*Pre-order - Ships in aprox 1-2 weeks*)
Throttle or Brake Pedal (*Pre-order - Ships in aprox 1-2 weeks*)
$17.00
Speedy Squirrel Speed Controller 90A 3600 Watt Two Channel Motor Controller 20250915_153539.jpg 20250829_213218.jpg
Speedy Squirrel Speed Controller 90A 3600 Watt Two Channel Motor Controller
$105.00
Enclosure:
Pedal Adapter Plate 20250915_153039.jpg
Pedal Adapter Plate
$10.00
Color:
775 to 887 Motor Adapter 20250915_153340.jpg 20250915_153359.jpg
775 to 887 Motor Adapter
from $5.00
Hardware:

At Peanut Workshop we have extensively tested high performance brushed motors, we have found these motors to have exceptional performance. We have decided to offer them for sale as they can be difficult to find. We are not providing any kind of warranty on these motors, if there is an issue please contact us prior to use. We do not manufacture them and have no control over the quality of the motor. These are not priced to cover replacement of failed motors.

To install in a power wheels 7R gearbox, an adapter is required, we offer a 3D printed adapter and hardware to install these into a 7R gearbox. This adapter should be considered a single use item, they often have to be damaged to remove the pinion gear from the motor while replacing motors.

Specifications:

  • Dimensions

    • 48.0 X 68.0 mm

  • Shaft Diameter:

    • 5.005 mm

  • Input Voltage:

    • 18.0 VDC

  • No Load Speed:

    • 23500 RPM

  • Stall Torque:

    • 1900 mNm (Compared to ~700 mNm of the leading 775 motors)

  • Maximum Output Power:

    • 1100 W (Compared to ~400W Max power of leading 775 motors)

  • Electrical Connection:

    • Leaded

Take a look at the video below, these motors are featured in it.

You Might Also Like